The TOPTUL EAAC0260E Digital Clamp Meter is designed for electricians, technicians, and maintenance professionals who need to measure current without disconnecting the circuit.
It measures AC and DC current up to 600A through the clamp jaw and also supports AC/DC voltage, resistance, frequency, diode, and continuity testing.
The meter features a 4000-count LCD display, automatic range selection, data hold, and a maximum clamp opening of 30 mm.
Key Features
- AC and DC current measurement up to 600A.
- AC and DC voltage measurement up to 600V.
- Resistance measurement up to 40MΩ.
- Frequency measurement up to 100kHz.
- Diode and continuity testing.
- 4000-count LCD display.
- Auto range and data hold.
- Automatic shut-off after 30 minutes.
- 30 mm clamp-jaw opening.
- CAT III 600V safety rating.
- Two AAA batteries included.
Technical Specifications
- Brand: TOPTUL.
- Product Number: EAAC0260E.
- AC Current: 400A / 600A.
- DC Current: 400A / 600A.
- AC Voltage: 4V / 40V / 400V / 600V.
- DC Voltage: 400mV / 4V / 40V / 400V / 600V.
- Resistance: Up to 40MΩ.
- Frequency: 5Hz to 100kHz.
- Maximum Clamp Diameter: 30 mm.
- Display: 4000 Counts.
- Safety Rating: CAT III 600V.
- Power Supply: 2 × AAA Batteries.
- Dimensions: 190 × 71 × 37 mm.
- Weight: Approximately 200 g.
Frequently Asked Questions
How do you measure current with a clamp meter?
Select AC or DC current, open the clamp, and place one conductor inside the jaw. Close the clamp and read the displayed value.
Can it measure voltage?
Yes. AC and DC voltage can be measured using the supplied test leads.
Can two wires be placed inside the clamp?
No. Only one conductor should normally be placed inside the clamp. Placing live and neutral together may cancel the magnetic fields and produce an incorrect reading.